Do you own an Acurite weather station and are looking for help troubleshooting it? Look no further! In this blog post, we’ll be taking you through a complete guide on Acurite weather station troubleshooting.

We’ll cover topics such as power issues, connection issues, and more so that you can easily get your Acurite weather station back up and running in no time.

Read on to learn more about troubleshooting your Acurite weather station:

Why Is My Acurite Weather Station Not Working?

Acurite Weather Station

If your acurite weather station isn’t working correctly, it can be a real pain. If your station isn’t displaying data correctly or has stopped working altogether, there could be several reasons for this.

It’s important to troubleshoot the issue so you can get your station back up and running. Here are a few steps for the Acurite weather station troubleshooting:

  • Check the Display: If the display on your station isn’t working correctly, try resetting it. To do this, unplug the power cord from the wall outlet, wait 30 seconds, then plug it back in. This should reset the display and get it working again. 
  • Check the Batteries: The first step is to make sure the batteries in your weather station are fresh and fully charged. If they’re old or low, replace them with new ones. 
  • Check the Sensors: If you’re having issues with specific sensors in your weather station, make sure they’re all properly connected and that there are no loose wires. It’s also possible that one or more of the sensors may need to be replaced.
  • Check the Connection: If you have a wireless weather station, make sure the connection between the base unit and the remote sensor(s) is working properly. To check this, try moving the base unit to a different location and see if that helps. 

Acurite Weather Station Troubleshooting

1.Check the Display

If your Acurite weather station is not working properly, the first step is to check the display to get started with the Acurite weather station troubleshooting process.

So make sure it is powered on and that all settings are correct. Look for any error messages on the display and note them down for troubleshooting later. 

What to do:

If the display is off, make sure it is plugged in and that the power switch is turned on. Check the fuse to see if it needs replacing. If the display still does not turn on, try using a different outlet or contact Acurite for help.

Check the screen brightness. If the screen is too bright or dim, adjust it using the buttons on the back of the display.

Verify that all information is displaying correctly on the weather station. Pay close attention to wind speed, temperature, barometric pressure, rainfall totals, and other readings. If any readings are inaccurate, make sure that the appropriate sensors are properly connected to the display. 

Check the alarm clock settings to ensure they are set correctly. You may need to reset the time and date manually if they are incorrect.

2. Check the Batteries

The most common cause of a malfunctioning Acurite weather station is dead or dying batteries. If your weather station isn’t turning on or doesn’t seem to be reading data properly, it may be time to replace the batteries.

What to do: 

  • First, open up the battery compartment and inspect the batteries. Are they old and corroded? If so, then they need to be replaced. 
  • Make sure that the batteries are inserted correctly in the device. 
  • Finally, try replacing the batteries with fresh ones. 

Tip: When changing the batteries, it is important to use new alkaline batteries with a long shelf-life for optimal performance. It is recommended to replace the batteries every 6 months to ensure optimal accuracy.

3. Check the Sensors

The next step for Acurite weather station troubleshooting is to check the sensors. The sensors can sometimes become damaged from wear and tear, or from extreme weather conditions. To make sure they’re working properly,

What to do:

  • Start by taking a look at the connectors that hold them in place. Make sure they’re securely fastened and not broken.
  • Next, look for any visible damage or corrosion. If you find any, clean them off with a soft cloth and a mild detergent. Check all the wires too, to make sure they’re not frayed or corroded. 
  • Finally, check the calibration of the sensors. You can do this by setting the sensor to a known temperature and waiting to see if the weather station displays the correct information. If it’s off by more than two degrees, you should reset the sensor and adjust its calibration accordingly.

4. Check the Connection

The next step is to make sure that the connection between the unit and the internet is working properly. 

What to do, follow the steps below:

  • Make sure that the acurite weather station is properly plugged in to a power source. 
  • Check the connection between the weather station and the router. Make sure there are no loose or broken wires.
  • Double-check that the router is connected to the internet and working properly. 
  • If all of these steps have been taken, but the weather station is still not connecting, try resetting the device by pressing and holding the power button for 10 seconds. 

Additional Tips for Acurite Weather Station Troubleshooting

1. Make sure the weather station is properly positioned to receive an accurate reading. Check the display’s orientation and make sure it is facing away from direct sunlight. Avoid placing it near heat sources, and keep it away from sources of electromagnetic interference, such as a television or microwave oven.

2. Consider investing in a backup power source. A generator, inverter, or battery-powered backup can help keep your station running during a power outage.

3. Keep your sensors clean. Dust, dirt, and other contaminants can affect the accuracy of your readings, so make sure to wipe them down with a damp cloth every now and then.

4. Regularly inspect your sensors for damage. High winds or an errant baseball can cause them to malfunction.

5. Check that all of your cables and wires are securely connected. If you spot any loose connections, check the manual for instructions on how to properly reconnect them.

6. Try resetting the device. Most weather stations will have a reset button or procedure listed in their manuals.


Is the Acurite weather station resettable?

Connect the sensor and display unit and turn them off by removing all batteries and the power cord from each. Change the A-B-C switch on both devices to a new, matching channel before pressing and holding the reset button for 20 seconds, if applicable.

What is the lifespan of Acurite weather stations?

In average, a user can expect a sensor array to last 3 to 10 years if they follow the regular maintenance schedule outlined in the user handbook.

What Acurite model do I have?

The model number of your LCD Display can be found on the back or bottom of your unit. Remove the display stand to check the bottom of the display if you don’t see it on the back or bottom of the unit. An HD/Wi-Fi display’s model number can be found on the back of the display.


So those were some of the methods for Acurite weather station troubleshooting. By going through these steps, you should be able to pinpoint the cause of any issues you’re having with your Acurite weather station.

These simple steps will help you diagnose any problems with your Acurite weather station display. Once you have identified the issue, you can start looking for solutions. Hopefully these tips will get you back up and running in no time!

Similar Posts

Leave a Reply