Are you an Anycubic Photon owner who’s experiencing some problems? If so, you’re not alone. Many 3D printer owners have encountered common issues while using their Anycubic Photon 3D printer, from poor print quality to poor adhesion.
In this article, we’ll be going through the most common issues and discuss about anycubic photon troubleshooting process. With the tips and tricks in this guide, you’ll be able to get your 3D printer back up and running in no time.
So let’s dive right in:
A Step By Step Anycubic Photon Troubleshooting Guide
1. The Z-axis is misaligned
One of the most common problems with the Anycubic Photon is misalignment of the Z-axis. This can cause a variety of printing problems, including poor adhesion to the print bed, poor layer alignment, and visible lines or gaps between layers.
How to fix it:
The first step is to check the Anycubic Photon’s manual for instructions on how to properly calibrate the Z-axis. Once you have done this, you may need to make adjustments to the printer’s stepper motors.
This can be done by manually moving the axes and then tightening the screws until they are secure.
If you are having difficulty calibrating the Z-axis or making adjustments, you can also contact a service technician if you are still having issues after trying these steps.
By taking the time to properly align the Z-axis, you can ensure that your prints turn out as expected and that you don’t have to worry about layer misalignment or poor adhesion.
2. The build plate is warped
If your Anycubic Photon 3D printer’s build plate is warped, it can cause uneven prints and affect the overall accuracy of your prints.
To check for a warped build plate, place a piece of paper over the bed and manually move it around, ensuring that it is even with all four corners.
If you can see any light coming through the paper at any point, then your build plate is warped.
How to fix it:
To start, remove the build plate from the printer and place it on a flat surface. Inspect it and use sandpaper or a file to gently smooth out any areas where the plate is warped.
Once you have finished smoothing out the plate, heat up your 3D printer to its maximum temperature setting (usually between 70 and 80°C).
Then, carefully place the plate back onto the printer bed and allow it to cool. This will help the plate to settle into a flat position once again.
Finally, take a few test prints to make sure that your warp issue is fixed. The prints should come out smoother and more accurate if you’ve solved the problem correctly.
3. The LCD screen is flickering
If the LCD screen of your Anycubic Photon 3D printer is flickering, this could be caused by a number of different things.
First you should check to make sure the display cable is firmly connected to the mainboard. If it is, then check that all screws on the back of the printer are tightened and there are no loose wires.
If none of these are the cause, then it may be due to a defective LCD screen.
How to fix it:
You can unplugging the power cable and removing the display cable from the mainboard, then plugging it back in after 10 seconds and then turning the power back on.
If this does not work, you may have to replace the LCD screen. It’s not recommended that you try to repair the LCD screen yourself as it is complicated and time consuming.
Instead, you should contact an authorized Anycubic service center or a professional 3D printing specialist.
4. The print quality is poor
The Anycubic Photon can produce incredibly detailed and high-resolution prints, but you might experience a decrease in print quality if certain things aren’t set up correctly.
How to fix it:
First, check the settings in your slicer software. It is important to choose the right layer height, print speed, and other settings in order to get the best results. If the settings are incorrect, your prints may look blurry or have visible layers.
Next, inspect the build plate and nozzle. Make sure they are clean and free of debris. If not, give them a good cleaning using isopropyl alcohol and a lint-free cloth.
Finally, make sure that your filament is compatible with your printer and is being fed correctly. Filament that is too dry or brittle can cause issues with the extrusion process.
If all else fails, contact Anycubic for further assistance. They can provide additional troubleshooting tips or help you identify any hardware issues that may be causing poor print quality.
5. The printer is not connecting to the computer
One of the most common issues users have with their Anycubic Photon is not being able to connect it to their computer.
How to fix it:
1) Check your USB cable – Make sure that your USB cable is properly connected and is firmly secured. Try using a different USB cable if possible.
2) Reboot the printer – Unplug the power cable from the back of the printer and wait for a few seconds. Then plug it back in and power it on again. This will help reset any internal settings and might fix the connection issue.
3) Download the latest drivers – Anycubic regularly releases new drivers and firmware updates. Download the latest drivers from the manufacturer’s website and install them on your computer. This should ensure that the printer is running the most up-to-date software.
4) Adjust the port settings – You may need to manually adjust your port settings in order for your computer to recognize your Anycubic Photon. To do this, open up your device manager and go to “Ports (COM & LPT)”. Right-click on the port associated with your Anycubic Photon, then select “Properties”. In the “Advanced” tab, set the “Bits per second” field to 115200. Click “OK” to save your changes.
5) Connect to Wi-Fi – If you have access to a Wi-Fi network, you can try connecting your printer to it directly instead of using a USB cable. This may help if you’re having trouble with a faulty cable or outdated drivers.
Conclusion
So, if you Anycubic printer is not working properly then this anycubic photon troubleshooting guide will help you out. We have mentioned the 5 most common problems that the users of Anycubic photon printer faces.
If you ae one of those you have once look at the Troubleshooting tips mention in the above guide. If none of these solutions work, then you may need to contact Anycubic’s customer service team for more help
FAQs
Why are my resin prints failing?
It could be for a variety of reasons, including: Build plate is not sticky enough or sticky enough compared to the FEP sheet. FEP has been damaged or has become loose. Previous print debris prevents resin from curing to the build plate quickly after the FEP sheet.
How do I reinstall the printer firmware?
1. Select the “set up” button on the printer display’s home screen (it looks like a gear).
2. Go to “settings” > “device settings” > “reset settings” > “reset all” > “OK” > “Yes”.
How long is the warranty on Anycubic printer?
The device comes with a one-year of warranty (two years for business clients).
