Have you ever been in the middle of a load of dishes and noticed that the Frigidaire dishwasher not starting lights blinking? If so, you’re not alone.
If your Frigidaire dishwasher isn’t starting and the lights are blinking, then there can be multiple reasons behind it. The most common issue is that the heating element has a problem, there is a problem with the drain pump, the door is lost, or the touchpad is not responding properly.
However, luckily, most problems can be easily fixed, and below you will find some quick solutions to get rid of the error:
How to Fix Frigidaire Dishwasher Not Starting Lights Blinking?
As mentioned earlier, the issue can appear because of various reasons. However, getting rid of the error doesn’t need to be too complicated for you. To help you navigate it properly, you can check out the below table and try the quick DIY fix:
| Dishwasher Problem | Fix |
| Power supply issue | A quick dishwasher reset should help you fix the problem. |
| Heating Element Issue | If you have a multimeter, then use it to check if the heating element burned out or not. If it’s, then consider replacing it. |
| The door is not locked | Make sure to shut the door completely so the dishwasher can operate normally. |
| Faulty drain pump | Check if the drain pump motor has continuity and replace it if it doesn’t. |
| Unresponsive touchpad | Get a new touchpad to replace the faulty one, or consider buying the entire control panel. |
| Ribbon cable connector issue | Clean the ribbon cable connectors and then tighten the connections. |
Now let’s talk about these issues briefly below:
Understanding the Warning Light System on Frigidaire Dishwashers
Before you try to diagnose and fix your dishwasher, it is important to understand the warning light system on your Frigidaire Dishwasher. There are six possible warning lights on a Frigidaire dishwasher:
- The first light is the Rinse Aid Indicator Light. This light will come on when the rinse aid needs to be replenished.
- The second light is the Heating Element Indicator Light. This light will come on when the heating element needs to be replaced.
- The third light is the Door Locked Indicator Light. This light will come on when the door is locked and will stay on until the door is opened.
- The fourth light is the Low-Temperature Indicator Light. This light will come on when the dishwasher has not reached the proper washing temperature.
- The fifth light is the Overfill Protection Indicator Light. This light will come on if water starts to overflow from the dishwasher.
- The sixth and final light is the Dishwasher Not Empty Indicator Light. This light will come on when there are still dishes in the dishwasher.
Now that you know what each of these lights means, you can start diagnosing and fixing your dishwasher.
Must Check – If you have a frigidaire oven that is not heating up, try this fix.
Reset Frigidaire Dishwasher
One of the best methods to fix the dishwasher that won’t start but just blinks light is to reset it. This is how you can fix GE Dishwasher if it won’t start just beeps.
If your Frigidaire dishwasher lights flashing but won’t start, you can reset it by following these steps:
- Unplug the dishwasher or turn off the breaker that powers it.
- Wait at least five minutes, then plug the dishwasher back in or turn on the breaker.
- Press the Power button to turn on the dishwasher.
- The dishwasher should start up normally now.
This will probably solve the Frigidaire dishwasher flashing lights not starting problem.
Close The Door Properly
Make sure to close the dishwasher door properly before start using it. As you need to close the properly before the machine can start working.
So if you see lights on your dishwasher blinking but isn’t starting up then it could mean that you haven’t closed the door properly.
So close the door properly and then click on the start button again. In case there is a problem with the door latch and it fails to close properly, then getting professional help would be a good idea.
Faulty Drain Pump
Another reason why your Frigidaire dishwasher not starting could be a faulty drain pump. After you are done doing the dishes, the drain pump is responsible for removing the water from the tub. However, in case, if the drain pump fails to function properly you won’t be able to do another round of washing dishes.
So to fix this, you should first check the continuity in the drain pump motor. If it’s not working, then you will need to replace it. Along with that, also check if there are any other faulty components and replace them as well.
Unresponsive Touchpad
Another reason for your dishwasher to blink lights and not start could be an unresponsive touchpad. To test this, you can simply press a few buttons on the touchpad and see if your dishwasher is responding to that. If the touchpad doesn’t respond, then you have a faulty touchpad, and you will need to replace it.
Faulty Control Board
Apart from the touchpad, the issue could be with the control board as well. So open the control panel of the unit via the front panel, then clean the ribbon cable connectors of corrosion and check the conditions of the cable going to the touchpad. Also, make sure that all the connections are properly set.
In case the control board fails to work properly, damaged or broken, then you will need to replace it. However, before doing so, make sure to seek professional help.
FAQS – Frigidaire Dishwasher Not Starting Flashing Lights
1. Why won’t the dishwasher start when the lights are flashing?
The answer is that this could be caused by a variety of issues, such as a faulty wiring connection or a faulty control board. If your dishwasher is more than four years old, it could also be due to worn-out parts that need to be replaced. You can try checking the connections and seeing if any of the parts need to be replaced.
2. What is the most common dishwashing issue?
Dishes Don’t Clean Well. Dishwasher failure to effectively clean dishes is one of the most frequent complaints. You might need to make some repairs if your dishwasher suddenly seems to be ineffective.
3. Which is more affordable dishwasher replacement or repair?
You should replace a unit if the cost of repairs is 50% or more than the cost of a new one. Therefore, if replacing your current dishwasher would cost $500, fixing it shouldn’t cost more than $250. If you’ve had to make repeated repairs to your dishwasher during the past year, that’s another indication it’s time to get a new one.
4. Why does my dishwasher blink when I push the start button?
The blinking Start/Resume light (on some models) indicates that the cycle or start-up was interrupted. This can occur if the door is opened during the cycle or if power is lost. Within 3 seconds of pressing Start/Resume, firmly close the door.
5. What causes the dishwasher control panel to malfunction?
There are various simple possibilities that could be causing your dishwasher control panel issues, including the following: The control panel for the dishwasher must be reset. The dishwasher control panel issue is triggered by a power outage. A kid lock has been activated, causing issues with your dishwasher’s control panel.
6. How can you activate the test mode on a Frigidaire?
Using a Frigidaire Refrigerator’s Diagnostic Mode. Begin by continuously holding down the Freezer Temperature Up and Freezer Temperature Down buttons. Now, release the buttons and push them both at the same time twice more.
Conclusion
Frigidaire dishwashers are one of the best dishwashers that you can get to wash your dishes. They come with light indicators on them that indicate their situation.
If your Frigidaire dishwasher was not starting flashing lights, then we hope that you were able to fix this with the help of this article. For more appliance issues fixes, keep reading our blog TroubleShootingPoint.
Also Check – Amana Dryer Not Heating Up? [Fixed]
