[Fixed] Whirlpool Washer Not Spinning Clothes Dry

Whirlpool washing machine is a favorite choice of many. Thanks to the brand trust and the features they offer. Even though Whirlpool washing machines are perfect, they can also go through random issues, such as the Whirlpool washer not spinning clothes dry.

In this state, your washier is spinning, but the clothes are still well. As a result, the cycle is incomplete. So, how do you fix this error?

Well, here are a few troubleshooting methods that can be a help:

What Causes a Whirlpool Washer Not to Spin Clothes Dry? 

If you’ve recently noticed that your Whirlpool washer isn’t spinning your clothes dry, there are a few possible causes. The most common culprits are overloaded machines, lint build-up, or a broken belt or motor.

To help you diagnose the issue, start by checking for lint or debris that may have clogged the machine. If necessary, you can open up the washer and check for any problems with the belt or motor.

If the belt looks worn or frayed, or if you hear any unusual noises coming from the motor, these could be signs that the belt or motor needs to be replaced.

If none of these issues appear to be the problem, it’s likely that your machine is overloaded. Try washing fewer items at once, and make sure that you’re using the correct water level for the size of the load.

With some troubleshooting and a little bit of know-how, you should be able to get your Whirlpool washer spinning your clothes dry in no time.

Troubleshooting a Whirlpool Washer Not Spinning Clothes Dry 

If your Whirlpool washer is not spinning your clothes dry, don’t worry – you can troubleshoot the issue with a few simple steps. Do you have a Whirlpool washer that is not spinning clothes dry? If so, you’re probably wondering what’s wrong and how to fix it. Fortunately, there are a few common problems that you can check for and potentially fix yourself 

Drum load imbalance

First, check to make sure the washer is properly leveled. An unbalanced load can cause the washer to not spin properly. If the washer is not level, adjust the feet to level it. To fix this, redistribute the load and try the cycle again.

Lid switch

Secondly, make sure the lid switch is working. If the lid switch is faulty, the washer won’t spin. 

Belt wear

Finally, inspect the drive belt to make sure it’s not loose or damaged. A loose or worn-out drive belt will cause the washer to not spin.

Drain hose clog

Although such issues are uncommon, it is still required to inspect the drain hose. The water will not drain if it becomes kinked or plugged, and the laundry will remain damp after washing. It is required to remove the hose from the drain pump and inspect it for kinks. Additionally, examine for obstructions in both the hose and the drain pump that prevent water from escaping.

Drain filter issue

Drain filter issues are common. A drain filter will not thoroughly dry out garments if it becomes blocked. Typically, this consists of little items such as buttons, pins, coins, paper clips, hooks, runners that have come off locks, and so on. The drain filter is positioned at the bottom of the washing machine, behind the front panel. It is simple to access and clean it; this manipulation will aid in the regular drainage of water. If you are deal with this issue thoroughly, then proceed as follows:

• Compress the clutch ring spring using pliers and remove it from the drum.
• Examine the rivet holes that hold the o-rings.
• If the holes are extremely clogged, the clutch must be replaced.
• The external tank does not need to be removed when doing these adjustments; simply remove the gearbox.

Motor Coupling

Another issue can be a broker motor coupling. The motor coupling attaches the motor to the transmission. Also, two white plastic couple parts and a rubber isolator piece fit between them.

And over a period of time, normal wear and tear or other issues like overloading can cause the motor coupling to break. So in such a case, the washer will not spin.

To fix this, follow the below steps:

• First, disconnect the washer from the power source and turn off the water or disconnect the external hose to gain access to the rear of the washer.
• Next, on the top-loader washer you will need to remove the screws on the control panel and lift it up to access the retaining clips that hold the washer frame on.
• After that, remove the washer frame.
• If you are using a front-loader washer, you may need to remove the top panel to gain access to the back panel, which needs to be removed.
• Next, to access the motor, you will need to remove the by unclipping the retainer clips and pull the pump off the motor shaft.
• Disconnect the motor wiring harness.
• Remove the two screws that hold the motor retainer clips in place.
• Now check for any damage in the motor coupler.
• If there is damage, consider replacing the motor coupler parts by removing the old motor coupler parts.
• Install the new motor coupler.
• Reassemble the washing machine.

Contact customer care

If you can’t identify the issue, it may be best to call a professional to diagnose the problem and make repairs.                                                                                                                                                             If you find that any of these common issues are causing your Whirlpool washer to not spin your clothes dry, you can easily fix the problem yourself.

Conclusion

It can be frustrating when your Whirlpool washer isn’t spinning clothes dry. Most of the time, the cause is a simple issue that can be easily fixed.

To help diagnose and repair the problem, we have outlined the most common causes and solutions for a Whirlpool washer not spinning clothes dry.

If you find yourself stuck, be sure to contact a professional for help in repairing your Whirlpool washer. With a bit of patience and the right know-how, you can get your Whirlpool washer spinning clothes dry in no time!

FAQs

Also Check:

• Whirlpool Cabrio Washer Stuck On Sensing
• Maytag Washer Stuck on Sensing
• Amana Washer Stuck On Sensing